UV LED Curing Equipment COB 80W Chiller UV Lamp LED UV Curing Machine
UV LED UV LED Curing Equipment Product Description
The item may be administered along with either Water-cooling or even wind-cooling strategy.
Various other treating dimension and also current may be created according your requirment, inluding mix
wavelenth unique wavelenth as well as treating dimension.
Greater functionality and also lowered consumption.
Apply in a number of printing industries, coating, in addition to sticky.
FAQ
Q1. Are you a factory?
A. Yes! We are factory in Shenzhen. We have been producing UV LED products for seven years.
Q2. Can we customize the product?
A. Yes! We can produce according to your requirements or technical drawings.
Q3. What is your main products?
A. UV LED Lamp Bead; UV LED Module; UV LED Single Light.
Q4. Do you have any MOQ limit for led light order?
No! One is also acceptable.
Q5. What is your usual payment terms for orders?
A. T/T. Others payment terms also is ok.
Q6. How long does it take for my order to be shipped?
A. It usually takes 3-7 days, depending on the quantity.
| Item | UV LED UV LED Curing Equipment COB 80W |
| Power | 80w |
| Color | UV |
| Diode Brand | DC, LG |
| Diode type | COB smd type |
| Size | 44mm*27mm |
| Luminous Size | 37mm*8mm |
| Chip Material | Epileds |
| Wavelength | 365nm,385nm,395nm,405nm |
| Cooling scheme | Water cooling |
| Application | Apply in various printing industries, painting, and glue. |
| Lifespan (hours) | 20000-30000 |
| Warranty | 1 years |
| Place of Origin | Guangdong, China |
Matters needing attention
Warm tips, in order to make our products play the best performance and reduce customer failure
in the use of products, please note:
1) During the whole process of use, all people who are in direct contact with UVLED should take measures
to prevent and eliminate static electricity, and do not touch the UV light emitting diode directly with their hands.
2) When welding, attention should be paid to the welding time and temperature, and the positive and negative
polarities should be distinguished.
3) Electrical parameters such as current and voltage should not exceed the rated values.
Attention should be paid to welding high-power UV LED:
1) The welding time should not exceed 3S;
2) Welding temperature should be less than 260 degrees Celsius.
3) Reflow welding is allowed only once.
4) When welding, distinguish positive and negative polarity, and avoid lens to avoid damage to lens..
5) Do a good job of heat dissipation measures, especially high-power UVLED as far as possible to ensure
adequate radiator area
6) In order to prolong the lifetime of ultraviolet light emitting diodes, it is recommended to use a stable
constant current driving power supply or IC instead of a constant voltage driving power supply or IC.
Thank you for your attention
